The LT15 START cuts logs up to 70 cm in diameter and 5.4 m long with the standard bed. In order to cut longer logs, bed extensions can be added to extend the sawmill bed to any required cutting length.

The sawmill features push feed and a manual crank for repositioning the blade for the next cut.

Thin-kerf blades require minimal energy consumption, so a 5.5 kW electric motor provides sufficient power to cut all wood types. A 14 HP petrol engine is also available on the LT15 START.

Logs are secured to the bed by the three standard log clamps and six adjustable backstops. The head height is precisely positioned by a hand crank and cutting is accomplished by steadily pushing the sawmill head along the length of the log with light pressure. Once the cut is completed, the head is raised, and then pulled back and lowered into position for the next cut.

A water tank feeds lubrication directly to the blade to improve cutting performance and keep the blade clean. The adjustable blade guide arm keeps the blade well-supported while cutting various sized material. Blade tension is easily adjusted, and keeps the blade at the proper tension for cutting.